WillyNillies.Info

Next I added the wing dowel doublers (the American pie shaped parts) and the wing saddle doublers. Make sure the pie wedges are in the right way so the holes line up.

Before I glue in the last former in the tail I pinch the fuselage halves together and tape them. Then measure the fuselage width and hold the fuselage against a straight edge and make sure the seam at the tail is centered. 20210215_123904.jpg 20210215_123954.jpg Once I'm happy with the alignment i a...

Once I was happy with the fits and alignment I pressed the blind nuts into the firewall. The nuts are a little thicker than the plywood. You don't want them protruding so i just press them flat and wick some medium CA in the gap behind the nuts. 20210215_121213.jpg Then I glue the fuselage together ...

I always dry fit the fuselage and make sure I have the parts figured out. This is beta kit SN: 1 so there are a couple little things I had to tweak.

This is a build log for my Dusty Crophopper build. I decided to try and build this sorta kit bash from materials only supplied in the kit.