WillyNillies.Info

My intent is to transform an S-Tee kit from relaxing park flyer into a pattern/stunt plane by replacing the standard flat bottomed wing with a zero-dihedral fully symmetrical wing designed and produced by Doug Hart at my request specifically for this experiment. I may also try enlarging the control surfaces to enhance 3d flying characteristics. Here's how that turned out. Thanks, Doug, for the custom cut.

Now to the fuselage modification. The Hummer wing has significantly less chord than the stock flat bottomed S-Tee wing. Doug said S-Tees tend to be tail heavy anyway so I should mount the Hummer wing at the BACK of the S-Tee wing saddle to help with balance. Therefore, here are my fuse mods for the symmetrical wing.