Spirit 250 Details
Posted: Thu Sep 24, 2026 3:51 pm
The Spirit 250 was originally designed especially for the AMA Foundation's Club Training Day Starter Kits program.
We now offer it here for your enjoyment!
It is a very easy to build all balsa airplane that makes a great beginner type aircraft in it's basic confirguration, or a great aerobatic performer set up with higher control throws using only Rudder, Elevator and Throttle. The wing was designed so that ailerons can be added by experienced builders/pilots if wanted. (No instructions are given for adding ailerons)
SPIRIT 250
LESS THAN 250 Grams!
NO FAA REGISTRATION REQUIRED!
Laser Cut-Self Jigging!
For 1, 2 or 3 channel control!
Specifications:
Wingspan: 24.75"
Wing Chord: 4.5”
Wing Area: 117 sq in
Fuselage length: 17.625”
Flying Weight Brushless or Glow: 150-200 grams
Wing loading 6.5 to 8.6 oz/sq.ft.
Wing Cube loading: 7.2 to 9.6
Features:
Build as 1, 2 or 3 channel
Bolt on Wing
Built in servo tray in fuselage
Easy access magnetic hatch
Wheel Pants Included
Laser cut self-jigging construction - The entire airframe can be built ready to cover in less than 1 hour!
Includes:
All wood pieces to build entire airframe
Wire pushrods with attach fittings
Motor mounting screws and washers
All required airframe hardware.
Landing Gear wire
Bolt on wing parts
Magnets for battery hatch
Decals for windows and Spirit logos!
Recommended Equipment:
2 each 2.5-to-6-gram servos
Power: 1407-2800kv brushless motor
For Brushless - 350 to 500 mah 2s lipo battery
- minimum 12-amp ESC.
- Gemfan 5030 or equivalent
2 Willykote Cover packs are needed to cover entire airframe.
VERY basic overview drawing with where parts go are included, as well as a parts map of all included parts and what their name is.
We now offer it here for your enjoyment!
It is a very easy to build all balsa airplane that makes a great beginner type aircraft in it's basic confirguration, or a great aerobatic performer set up with higher control throws using only Rudder, Elevator and Throttle. The wing was designed so that ailerons can be added by experienced builders/pilots if wanted. (No instructions are given for adding ailerons)
SPIRIT 250
LESS THAN 250 Grams!
NO FAA REGISTRATION REQUIRED!
Laser Cut-Self Jigging!
For 1, 2 or 3 channel control!
Specifications:
Wingspan: 24.75"
Wing Chord: 4.5”
Wing Area: 117 sq in
Fuselage length: 17.625”
Flying Weight Brushless or Glow: 150-200 grams
Wing loading 6.5 to 8.6 oz/sq.ft.
Wing Cube loading: 7.2 to 9.6
Features:
Build as 1, 2 or 3 channel
Bolt on Wing
Built in servo tray in fuselage
Easy access magnetic hatch
Wheel Pants Included
Laser cut self-jigging construction - The entire airframe can be built ready to cover in less than 1 hour!
Includes:
All wood pieces to build entire airframe
Wire pushrods with attach fittings
Motor mounting screws and washers
All required airframe hardware.
Landing Gear wire
Bolt on wing parts
Magnets for battery hatch
Decals for windows and Spirit logos!
Recommended Equipment:
2 each 2.5-to-6-gram servos
Power: 1407-2800kv brushless motor
For Brushless - 350 to 500 mah 2s lipo battery
- minimum 12-amp ESC.
- Gemfan 5030 or equivalent
2 Willykote Cover packs are needed to cover entire airframe.
VERY basic overview drawing with where parts go are included, as well as a parts map of all included parts and what their name is.