Balsa 250 contest for 2023

Post Reply
KevinC
Posts: 198
Joined: Tue Feb 09, 2021 7:54 pm
Contact:

Balsa 250 contest for 2023

Post by KevinC »

From Ed Larsen:

DESIGN CONTEST!!
Starts NOW and ENDS May 26th, 2023
These are the Simple Basic Rules;
1) A minimum of 3 (three) actual Willy Nillies ribs MUST be used PER Wing Panel. Your build pictures should include this detail. You may modify to add Ailerons, Slats, Flaps or any other additional wing modifications as long as the 3 (three) Willy Nillies Wing Ribs are used per panel.

2) Entries MUST meet the 250 grams AUW Ready to Fly or less ruling and post a picture of the plane on the scales with the flight battery visible on the scale or in the plane. This is a Honor System item.

3) Plane must fly, Proof of Flight by Vide. Even if it results in a crash it will have flown.

4) Builds started BEFORE this announcement are eligible as long as the contestant meets all the rules of the contest.

5) Log periodic build progress pictures to the forum by individual Pics, or by adding to an Album of Pictures. The Album feature is best so members can easily follow your progress and see/learn techniques that you use.

6) Entries: MUST be entered no later than May 22nd, 2023. This gives the Members 5 days to review the Entries of your aircraft and the videos to vote on the Builds.

7.) A Question Form will be posted starting May 22nd, 2023 with the entrants listed so members can place votes. Tallies will take place at 10pm of May 27th, 2023 and the winner(s) announced.

Ed Larsen will personally pledge a $10 WN Store Credit to each participant that finishes and enters their plane under the rules of the Contest with an additional $10 store credit to be awarded to the Winner of each Category. These credits will be matched by WillyNillies.com. Funds will be posted to Willy Nillies after the completion of the contest.
In addition, WillyNillies.com will be awarding a plaque to the winner of each of the categories.

Categories are as follows;

A) Best Scale model (civilian or military)
B) Best Original design
C) Best Modified WillyNillies.com kit
D) Best Multi-Wing design
E) Best glider/sailplane
F) People's choice

These rules are subject to changes and updating if needed for clarification. Any and all ideas regarding the "Rules" or clarification of the rules are greatly appreciated and we expect you to to post them to this thread only please.

The cutoff dates have been formulated to coincide with the Balsa 250 Fly In at AMA in Muncie, Indiana from the 27th to the 29th of May 2023. If you are planning to attend or can make it, bring your plane to show off!
KevinC
Posts: 198
Joined: Tue Feb 09, 2021 7:54 pm
Contact:

Re: Balsa 250 contest for 2023

Post by KevinC »

disappointingly low turnout but here are the entrants. For myself, prescheduled travel precluded my participation but I've taken steps to reduce that happening again. ;) Anyway, here are the contestants. All were great but Ed Larsen set an insanely high bar with his outstanding Dusty Crophopper - right down to the custom handmade retracts.
Oklahoma Mark Zero.jpg
Oklahoma Mark Hellcat.jpg
Lonnie Price Fun Fly Special.jpg
Lonnie Price Fun Fly Special.jpg (25.5 KiB) Viewed 14951 times
Kyle Crocet Twin Eaglet.jpg
Ken Boling Valiant.jpg
Ed Larsen Dusty Crophopper.jpg
KevinC
Posts: 198
Joined: Tue Feb 09, 2021 7:54 pm
Contact:

Re: Balsa 250 contest for 2023

Post by KevinC »

And the results: (from Ed Larsen)
"It's time to wrap up the Wing Contest.
With the low number of entries, we decided to allow the the overweight entry and recognize the exceptional effort put forth by the builder.
WN and I have awarded them as noted in the following categories;
A) Best Stand-off Scale model (civilian or military)
1. Hamp-A6M Zero - Oklahoma Mark
2. F6F Hellcat - Oklahoma Mark
3. BT-13 - Ken Boling
B) Best Original design
1. Fun Fly Special - Lonnie Prince
C) Best Modified WillyNillies.com kit
1. Twin Eaglet 250 - Kyle Croce
D) Best Multi-Wing design
1. No Qualified Entry
E) Best glider/sailplane
1. No Qualified Entry"

Personally I think Ed should get SOME kind of award for the craftsmanship and engineering involved in his amazing submission. When I grow up, I want to be able to build like Ed... ;)
Post Reply

Return to “Balsa 250 contest 2023”

Who is online

Users browsing this forum: No registered users and 0 guests