1806 2280 motor
Posted: Fri Feb 12, 2021 8:04 pm
Anybody running 4s on this motor. If so what prop and esc?
Page 1 of 1
Re: 1806 2280 motor
Posted: Sat Feb 13, 2021 10:13 am
Oo! Interested in seeing where this goes.
Re: 1806 2280 motor
Posted: Sat Feb 13, 2021 6:46 pm
Hi Don!
The stock Racerstar motor and HTIRC esc can handle 4s. You'll need to drop down to a 4.5 x 4.5 prop maximum size. A 4.25 x 4.25 is a very good compromise. Just be for warned.... it unleashes a beast!
Sincerely,
Doug and Becky
WillyNillies.com
Re: 1806 2280 motor
Posted: Sun Feb 14, 2021 9:07 am
Thanks Doug. I’m going to give it a try.
I did add a spar at the center wing joint just in case.
Don C
I did add a spar at the center wing joint just in case.
Don C