SS 250 Build
Posted: Tue Feb 23, 2021 2:04 pm
Here is my Super Sprt 250 build.. I've made a few mods to make a little more like a classic Kaos or Dirty Birdy..
Clipped the wings 1 bay per side
Put the taper on the leading edge of the wing
Moved the Fin/Rudder back and split the elevator to allow the larger rudder to go to the bottom of the fuse.
Wing servo linkages will be on top for no damage belly landings.
Emax 9051's, 3s, Racemax 1806 2280
I think I'm going to mount the alum gear on the bottom of the wing.. Might remove for that retract look.
Now if I can the motivation to start covering.. Thinking transparent yellow with blue and white trim.
Jimmy
Clipped the wings 1 bay per side
Put the taper on the leading edge of the wing
Moved the Fin/Rudder back and split the elevator to allow the larger rudder to go to the bottom of the fuse.
Wing servo linkages will be on top for no damage belly landings.
Emax 9051's, 3s, Racemax 1806 2280
I think I'm going to mount the alum gear on the bottom of the wing.. Might remove for that retract look.
Now if I can the motivation to start covering.. Thinking transparent yellow with blue and white trim.
Jimmy